Model Name: SH24Gi1000-D2
Operating Range : 2400~2500 MHz
Supported standards: IEEE 802.11b/g/n (802.11n Draft 2.0), 2Tx2R
Operation mode: Bi-directional, half-duplex, time division duplex, MIMO
Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside)
Output power: 1000 mW (30 dBm)
Input power: 0 ~ 20 dBm
Transmit gain: 15 – 18 dB
Receiver gain: 11-14 dB
Noise figure: ≤3.5 dB typical
Frequency response: ±1 dB over operating range
Power adapter: 12V/2A DC, 100~240V
Operating temperature: -20°C to +70°C
Operating humidity: Up to 90% relative humidity
Material: Cast aluminum
LED light: Power status LED and activity status LED
Booster size: 8.5 x 7 x 2 cm
Booster weight: 178 g
Package size: 21.3 x 15 x 6 cm
Package weight: 500 g
Package : 1 x SH24Gi1000-D2
2 x RG316 cable with SMA connectors (20cm)
2 x 6dBi omni antenna
1 x power supply
1 x user manual
Dual antenna WiFi Signal Booster 1000mW 2.4 GHz 2T2R / 300Mbps WiFi amplifier
The power amplifier is not suitable for use in high power devices
Step 01: Remove the Antenna from the Wireless Router (Access Point).
Step
02: Use this cable (RG316) to connect Amplifier 'input' port with
router 'output' port: note that cable is in standard spec.
Step 03: Connect the antenna with 'output' port of Amplifier.
Step 04: Power the amplifier with the matching source adapter: DC 12V.
